Skip to main content

Troubleshooting Overview: Start From the Symptom

This page finds the answer by symptom, so you do not have to read the chapters in order.

Read the table first, then go to the matching page.

Symptom overview​

SymptomMost likely causeGo to
The browser cannot open 192.168.10.1The address is missing https://Login and internet access
It says "Your connection is not private"The device uses a self-signed certificate; this is normalLogin and internet access
root / admin does not sign you inThe password has already been changedLogin and internet access
The gateway is configured but there is no internetThe WAN protocol does not match the access modeLogin and internet access
After changing the LAN port IP the admin page is unreachableThe computer is still on the old subnetLogin and internet access
The gateway has internet but the platform shows no deviceThe account name in the server address does not matchNetworking and reachability
All devices are online but the two sides cannot ping each otherThe subnet proxy is not configured, or subnets repeatNetworking and reachability
Ping works but web pages do not openAccess control has only one direction selectedNetworking and reachability
Bypass router mode is configured but the remote site is still unreachableThe endpoint gateway does not point at the gateway's LAN portNetworking and reachability
It drops occasionally, working on and offThe bypass router has DHCP on and competes with the upstreamNetworking and reachability
Surveillance is laggy and slowThe store's uplink is insufficient, or the link is not optimizedSlow and laggy
The gateway shows no lights at allA power supply or power adapter problemGetting technical support
The gateway login password is forgottenReconfigure only after a factory resetDevice maintenance

The 30-second version: check the lights first​

If the power light is off, check the power supply and the power adapter first.

If a network port light is off, check that the cable is seated firmly first.

Next, check internet access​

On a computer connected below the gateway, open any web page.

If it does not open, go back to the page for that access mode and check each item.

Finally, check whether it is online on the platform​

Sign in to the platform and check whether the member device status is 在线(Online).

If it is not online, go to Networking and reachability.

Do these three things before you report a fault
  1. Restart the gateway once.
  2. Confirm that the computer below the gateway has internet access.
  3. Screenshot the platform device list and statuses.

This saves a round of back-and-forth.

Next → Admin page unreachable, no internet after configuration