Documentation
Getting Started
Installation and Access
Network Configuration
Verification and Maintenance
Passwords, Factory Reset, and Firmware Upgrade
This page covers three maintenance actions: changing the password, factory reset, and firmware upgrade.
Every action on this page changes the configuration, and some of them wipe it. Screenshot the current configuration and archive it before you start.
Changing the gateway login password
The default account is root and the default password is admin.
Both values are public; change them right after you sign in.
| Item | Description |
|---|---|
| Where to change the password | Pending (to be filled in by the content provider) |
| Strong password requirements | Pending (to be filled in by the content provider) |
Record the new password. The gateway password is not stored on the platform; if you forget it, the only way back is a factory reset.
Forgot the password
Contact the device supplier first and confirm whether there is another way.
Only after confirming there is none, do a factory reset.
Factory reset
That includes network interfaces, the networking program, and access control. After the reset you must reconfigure the device and bring it back online on the platform. Whether the platform side needs the device added again: pending (to be filled in by the content provider).
Sequence:
- First confirm that this device has no usable backup.
- Contact the device supplier and explain the situation.
- Once you confirm the configuration can be wiped, do the factory reset.
- Reconfigure following Quick Start.
| Item | Description |
|---|---|
| Reset button location | Pending (to be filled in by the content provider) |
| How long to hold it | Pending (to be filled in by the content provider) |
Replacing a device
- Remove the old gateway from the platform, or take it offline.
- Reconfigure the new gateway following Quick Start.
- Add the device on the platform again and configure its subnet proxy.
Whether the platform supports swapping a device directly: pending (to be filled in by the content provider).
Firmware upgrade
Do it during a quiet period and tell the users in advance. Never cut power during an upgrade.
| Item | Description |
|---|---|
| Where to upgrade | Pending (to be filled in by the content provider) |
| Whether configuration is kept | Pending (to be filled in by the content provider) |
| Where to get the firmware | From the device supplier |
Back up the configuration before upgrading. If an upgrade goes wrong, contact the device supplier and do not retry over and over.
Next → Troubleshooting overview
Was this page helpful?A one-line note helps us make these steps more accurate.